network access control system

relibale access control system competitve price good performance

With the vigorous development of high-tech, the intelligent management has penetrated into people’s social life. Many intelligent communities and buildings have spring up. In order to meet the requirements of the information times, door access control must satisfy the requirement of current and future’s development at the office and living environment. The traditional single access control and 485 cabling system haven’t satisfied the modern information management yet. SEWO network door access control SEWO-M2000IP realizes the access network connected and cutting and improving the TCP/ IP agreement at the same time in order to adapt the requirements of the system. And this system operation is steady and reliable after testing.

 

 

Technique parameters: 1 voltage : 220V±10%(inside DC12V/4A power)2 lock voltage: supply in addition (chose according to the parameters of the lock) 3 reader voltage: reader working current less than 200mA,and the distance from controller is less than50m. It can be supplied by the door access controller. Otherwise it needs to be supplied alone.4 working temperature: -20°C ~ +70°C5 controller working current: less than 200mA6 alarm output current: less than 5A / each circuit(relay contact)7 unlocking output current: less than 5A / each circuit(relay contact)8 storage capacity: 10000 user download,300000pcs recording data

 

9 data retention time without power :more then ten years

10 reader induction distance:>2-10cm(depends on card reader)11 read signer communication distance: less than100m(depends on the reader equipment, need 1.0 communication line)12 communication method: controller connect with computer with TCP/IP communication. The distance between network cable and switchboard should less than 100m.

Main feature:1 With leading international advanced high speed computing circuit and flash mass storage technical design, the reaction speed is faster than other’s. 2 Common multilingual windows software operation interface, easy practical, powerful functions, not necessary need of professional knowledge, easy master and install conveniently. It is easy to train.3 The independent intellectual property rights and open data communication agreement makes the system integration more convenient and the service more meticulous and thoughtful.4 fire linkage, alarm for the door long time unclosed, force open alarm, illegal card alarm, duress alarm functions (if not connected with fire and alarm linage expansion board, it only has software interface alarm, and drive the computer to alarm, if connected with the expansion board, the system has the hardware alarm output function and can drive the light or police whistle equipments.)5 the state of forced door is open or close 6 open when multi cards pass the testing.7 Magnetic door input, online, the control center can through the door magnetic signal detect the state of the door at any time.

 

8 Set the operation modes: there are three modes, one mode is open,(not need card , the door keeps open statement). The second mode is close.( the door keeps close, the card invalid),the third mode is normal.( the door open when the card is read.)

You can set eight time slots to make the door statement modes.

 

 

 

network access control system